Product Manual

ENGLISH
M)
Disassembly: Wide-angle implement input driveline guard
(Figs. MI-M7)
1. Remove locking screws.
2. Remove double yoke guard cone.
3. Remove bearing ring.
4. Remove locking screw.
5. Turn cone to assembly position.
6. Remove half-guard.
7. Remove bearing ring.
N)
Assembly: Wide-angle implement input driveline guard
(Figs.
NI-N9)
1. Grease yoke groove and inner profile tube.
2. Fit bearing ring in groove with recesses facing profile tube.
3. Slip on half-guard.
4. Turn cone until it engages correctly.
5. Tighten locking screw.
6. Grease bearing groove in double yoke.
7. Insert bearing ring.
8. Slide guard cone for double yoke over cam from the connecting end.
Make sure that holes for screws are visible in the recesses.
9. Tighten locking screws.
P)
Spare parts for implement input driveline guard
Guards are designed to protect the user.
Defective and damaged guards must be repaired immediately.
A Only original Walterscheid agraset spare parts should be used.
Contact your dealer.