Product Manual

Page 3 of 5

006321 REV. B Date 09-07-11 JWC

●O

Holder Assembly: 6550-6551-(Kit # 227615K), 6570-6571-(Kit # 227617K)

●Tools needed:

• Phillips Head Screwdriver

• 7/16” wrench (multiple size wrench included)

• Powered tools NOT recommended –

●Assembly Instructions

1. Locate the REAR RIGHT-SIDE of the chair. (FIG.1)

2. Insert the “Spacer” into the U-Bracket”

(FIG. 2) and place onto chair frame.

3. Insert the two screws through the holes in the

“U-Bracket”.

4. Screw on the nylon lock-nuts and, using the wrench

provided, tighten the lock-nuts to the bracket. (FIG.3)

5. Insert O

holder into bracket until the silver snap-button

sits in the notch of the bracket. (FIG.4)

●Parts Included:

Description: Qty. Part Number

O2 U-BRACKET 1 227615

OXYGEN TANK HOLDER 1 250015

IV SPACER

(655 model ONLY) 1 227607

1” GRAY SQUARE CAP 2 700700

STAR KNOB 1 201215

1/4-20 x 2 3/4" PHILLIPS-HEAD SCREW 2 566571

1/4-20 NYLON LOCKNUT 2 566204

FIG. 1

IMPORTANT:

The “Spacer” is for the 655 model ONLY

and should be placed as shown. (FIG.2)

FIG. 3

NOTE:

Left & Right is determined – as if sitting

in the chair

FIG. 2

FIG. 4