Owner's manual

5. Slide the adjusting screw lock back into place
against the adjustment screw. Tighten the
adjustment screw lock screw by turning it clockwise.
6. Remount the barrel/forearm to the receiver and
check the fit. If the fit is still too tight or too loose,
continue to adjust the fit according to the
directions. Adjusting is a matter of trial and error.
It may take several attempts before you are satisfied
with the fit. When you are satisfied with the fit, be
sure to replace the adjustment screw lock and
tighten the adjustment screw lock screw.
PARTS, SERVICE, REPAIR AND QUESTIONS
If your Winchester rifle or shotgun should ever need
service or repair, it is often best to contact a
Winchester Rifles and Shotguns Authorized Repair
Center. To locate an Authorized Repair Center visit
www.winchesterguns.com or contact our customer
service department. In some cases it is appropriate to
use the Winchester Rifles and Shotguns Service
Center in Arnold, Missouri. If you have any questions
contact our customer service department and we can
help you determine the best place to service
your firearm.
Licensee
1
1
0
0
FIGURE 9
Adjusting
Screw Lock
Screw
Adjusting
Screw
Loosen Fit
Direction
Tighten Fit
Direction
Turn the adjusting
s
crew one notch at
a time to loosen or
tighten the fit of
the receiver to the
barrel/forearm.