Instructions / Assembly

ManualsBrandsWilsonart ManualsCountertops4 ft. x 8 ft. Laminate Sheet in Black Velvet with Traceless

Table Of Contents

TECHNICAL DATA

Wilsonart® Traceless™ Laminate

1. Manufacturer

Wilsonart LLC

2501 Wilsonart Drive

P.O. Box 6110

Temple, Texas 76503-6110

Phone: (254) 207-7000; (800) 433-3222

Fax: (254) 207-2384

Web Site: www.wilsonart.com

2. Product Description

Recommended Uses

Wilsonart® Laminate, Type 138, is suitable for use on retail, office furniture, manufactured housing,

hospitality, casework, countertops, and interior doors and also for architectural application on

wainscoting, valances, and divider systems.

• Type 138 Common applications are for counters, desktops, cabinet doors and drawer panels.

Type 138 is intended for use on vertical and horizontal interior surfaces.

• Type 738 Traceless with RE-COVER™ Common applications are suitable for use in retail, office

furniture, manufactured housing, hospitality, casework, countertops, and interior doors and also

for architectural application on wainscoting, valances and divider systems.

Product Composition

Decorative surface papers impregnated with resins that are pressed over kraft paper core sheets

impregnated with phenolic resin. These sheets are then bonded at pressures greater than 1000

pounds per square inch at temperatures approaching 300°F (149°C). Finished sheets are trimmed,

and the backs are sanded to facilitate bonding.

Basic Limitations

Wilsonart Traceless Laminate is for interior use only and is not recommended for direct application to

plaster, concrete walls, or gypsum wallboard. It is not structural material and must be bonded to a

suitable substrate. Traceless Laminate is a non-post formable product.

Do not subject Wilsonart Laminate to extremes in humidity, temperatures higher than 275°F (135°C)

for substantial periods of time, or intense, continuous, direct sunlight.

Patterns & Colors

Available in the following Wilsonart colors: 15501, 15502, 15503, 15504 and 15505. See all patterns

and colors at www.wilsonart.com

. Please see actual sample before specifying.

Finish Availability

• #31 Traceless Finish

A smooth textured finish with moderate reflective value.

Nominal Glossometer Reading = 2.5

#31 finish is designated for Wilsonart Traceless Laminate only.

NOTE: Nominal Glossometer Readings are made at a 60

angle of incidence.

Summary of content (4 pages)

PAGE 1
TECHNICAL DATA Wilsonart® Traceless™ Laminate 1. Manufacturer Wilsonart LLC 2501 Wilsonart Drive P.O. Box 6110 Temple, Texas 76503-6110 Phone: (254) 207-7000; (800) 433-3222 Fax: (254) 207-2384 Web Site: www.wilsonart.com 2. Product Description Recommended Uses Wilsonart® Laminate, Type 138, is suitable for use on retail, office furniture, manufactured housing, hospitality, casework, countertops, and interior doors and also for architectural application on wainscoting, valances, and divider systems.
PAGE 2
Standard Sheet Widths 48” 1219mm Standard Sheet Lengths 96” 2438mm 120” 3048mm Thickness and Weight Description 138 Thickness 0.039” ± 0.005” (0.99mm ± 0.13mm) Weight per square foot 0.260# 3.
PAGE 3
Test data to determine compliance with these codes are obtained by the Steiner Tunnel Test method of the American Society for Testing Materials (ASTM-E-84, Standard Test Method for Surface Burning Characteristics of Building Materials). Tests were conducted in accordance with test method and mounting procedure as described in paragraph X1.7.2 of the test method. This procedure is cataloged by Underwriters Laboratories, Inc. as UL 723.
PAGE 4
Bond with adhesives and follow the techniques recommended by the adhesive manufacturer. Recommended adhesives are permanent types, such as urea and polyvinyl acetate (PVA), and contact types. Wilsonart adhesives are recommended for most bonding conditions. To avoid stress cracking, do not use square-cut inside corners. All inside corners should have a minimum of 1/8” (3.175mm) radius and all edges should be routed smooth. Drill oversized holes for screws or bolts.