Installation & Assembly
A
N
B
K
C
I
--1
Light Bulb (Not included)
E12
WIRE CONNECTION DIAGRAM
CAUTION: Risk of fire
CANOPY INSTALLATION INSTRUCTIONS
Attach the crossbar (B) to the existing electrical
box (A) using the two crossbar screws (C) which
are not supplied and should already be in your
box.
Release the D#(safe screws), and then cover the
B#(round hooker) with the l#(round ring)
Pass the main wire (J) and ground wire (H)
through the loop (1), the chain (G), the canopy
loop nut lock (F), the canopy (E), the canopy loop
(D) and the crossbar (B) until the end of the main
wire (J) reaches the electrical box (A)
where you can make the appropriate connections.
When connecting the wire use electrician
approved junction caps (K). Stow the excess wire
in the electrical box(A). Raise the canopy (E) and
canopy loop nut lock (F), attach canopy (E) to
ceiling, slide canopy loop nut lock (F) over canopy
loop (D) and hold the canopy (E).
Buckle is used to connect the chain and
loop or adjust the length of chain.
USER MANUAL
Dear Customer
Thank you for yor business!
We want you to be completely satisfied with your purchase.
Product review means the world to us, if you want to share your experience
you can leave a short product review.
Thank you
( Rated 110-130V/60Hz, bulb 40W-60W maximum.)