Warranty

ManualsBrandsWholesale Solar ManualsGrid TieSMA 6.2 kW Grid Tied Solar System with SMA Inverter and 20x Mission Solar 310w Panels

Page 1 of 4

PV Module Limited Warranty

Mission Solar Energy LLC

Mission Solar Energy LLC (Mission Solar) provides the following Limited Product Warranty and Limited Power

Warranty (collectively, “Limited Warranty”) to the original end user purchaser (the “Customer”) with respect

to its photovoltaic module products (“Modules”), subject to the conditions, exclusions, and limitations set forth

below.

1) Warranty Start Date

The Warranty Start Date for a Module is either the date of purchase by the Customer or twelve (12) months

after the date of production as indicated in the serial number (digit numbers 2-5 (YYMM) starting from the

left side), whichever date is earlier.

2) Limited Product Warranty

Mission Solar warrants to the Customer that the Module(s) shall be new and free from defects in the

materials and workmanship under normal application, use, and service conditions (as specified in the

Installation and User Manual), and will conform to the specifications and drawings applicable thereto,

during the period beginning on the Warranty Start Date and ending one hundred twenty (120) months after

such Warranty Start Date.

If a Module fails to conform to this Limited Product Warranty during this ten-year period, Mission Solar

shall, at its sole option, either (a) repair or replace the non-conforming Module at no charge to the Customer

for replacement modules or parts, or (b) provide the Customer with a refund equal to the historical

purchase price of the Module, annually reduced by a linear depreciation of ten (10) percent.

a) This Limited Product Warranty covers glass breakage provided that there was no external cause of

breakage.

b) Any deterioration in appearance of the product (including, without limitation, scratches, stains,

mechanical wear, rust, or mold), or any other changes to the product which occur after delivery to the

Customer do not constitute a defect under this warranty.

c) This Limited Product Warranty does not warrant a specific power output, which shall be exclusively

covered under the Limited Power Warranty below.

3) Limited Power Warranty

Mission Solar warrants that if, within twenty-five (25) years from the Warranty Start Date, any Module

exhibits a power output (Output Threshold) less than the percentage applicable to such year (as set forth

in the Output Schedule below) of the nominal power output for that Module as specified on its original

product label (the Rated Maximum Power), and if such decrease in power below the Output Threshold is

determined to be due to defects in the materials or workmanship under normal application, use, and service

conditions as specified in the Installation and User Manual, Mission Solar shall, at its sole option, either (a)

repair or replace the non-conforming Module at no charge to the Customer for replacement modules or

parts, (b) provide the Customer with additional Module(s) to make up for such decrease in power so that

the power output equals or exceeds the Output Threshold, provided, it is possible for the Customer to

mount such additional Module(s), or (c) refund the difference between the actual power output of the

Module and the Output Threshold, based on the current market price of a comparable Module at the time

of the Customer’s claim.

Summary of content (4 pages)

PAGE 1
PV Module Limited Warranty Mission Solar Energy LLC Mission Solar Energy LLC (Mission Solar) provides the following Limited Product Warranty and Limited Power Warranty (collectively, “Limited Warranty”) to the original end user purchaser (the “Customer”) with respect to its photovoltaic module products (“Modules”), subject to the conditions, exclusions, and limitations set forth below.
PAGE 2
a) For purposes of determining Module power output, measurements shall be based on, or normalized to, standard test conditions of 1000W/m2 irradiance, 25⁰C cell temperature, and AM 1.5 light spectrum. Measurements shall be made in accordance with IEC 60904, and shall account for measurement system error in accordance with EN 50380. b) Output Schedule for P-Type Mono Modules: 3.0% in the first year, and linearly 0.7% per year thereafter, ending in 80.20% in the 25th year after the Warranty Start Date.
PAGE 3
vi) Defects due to cosmetic blemishes associated with installation or the normal wear and tear of Modules. vii) Removal of Modules and reinstallation at a new site.
PAGE 4
5) Warranty Transfer This Limited Warranty is transferable to (i) a subsequent purchaser of the Modules or installation location so long as the Modules remain installed at the original installation location, or (ii) any purchaser of Modules from an authorized reseller prior to such Modules’ installation. 6) Obtaining Warranty Service a) In the event of a warranty claim, the Customer should promptly contact the seller from which they purchased the Modules, who will provide instructions for filing the claim.