Installation Manual



l ForType2-Alignthetwoindentationsintheinverterenclosurewiththetwo

triangularmountingtabsofthebracket,andlowertheinverteruntilitrestsonthe

bracketevenly.

Figure 18: Hanging the inverter on the bracket - Type 2

4. Optionally,securetheSafetySwitchbrackettothewall:

l MarkthelocationofthebracketscrewfortheSafetySwitchanddrillthehole.

Figure 19: Safety Switch bracket

l Fastenthebracketusingastandardbolt.

Verifythatthebracketisfirmlyattachedtothemountingsurface.

Chapter 3: Installing the Inverter

SolarEdge-Installation Guide MAN-01-00002-4.0