Installation Guide
REC Installation Manual - REC Alpha Series - UL 6
Rev A . Ref: NE
CONTENTS
CONTENTS
List of figures
INTRODUCTION
How to use this manual
Your responsibility as an installer
Support
Liability disclaimer
Limited warranty
SAFETY MEASURES
Safety in the working area
Panel handling
ELECTRICAL INSTALLATION
MECHANICAL INSTALLATION
Fire guidelines
Orientation
Environmental factors
PANEL INSTALLATION
Rail specifications
Clamp specifications
Mounting methods: Clamping with rails parallel to the short side
Mounting methods: Clamping with rails parallel to the long side
Mounting methods: Slide in systems
Mounting methods: Mounting holes
Drainage holes
Grounding
CONNECTIONS AND CONNECTORS
MAINTENANCE
Cleaning instructions
Recycling
Disposal of old electrical and electronic equipment
PANEL CHARACTERISTICS
Technical Properties: REC Alpha Series
Technical Properties: REC Alpha Black Series
ANNEX : INSTALLATIONS ON WATER PLATFORMS
ANNEX : INSTALLATIONS USING RAPID SHUTDOWN DEVICES
DOCUMENT HISTORY
LIST OF FIGURES
Fig. : Clamp specifications: End and mid-clamps
Fig. : Clamping of panels with rails parallel to the short side
Fig. : Clamping zones for panels with rails parallel to short side
Fig. : Clamping of panels with rails parallel to the long side
Fig. : Clamping zones for panels with rails parallel to long side
Fig. : Mounting holes: REC Alpha
Fig. : Mounting hole specifications: REC Alpha
Fig. : Mounting hole installation example: REC Alpha
Fig. : Drainage and grounding holes
Fig. : Grounding lug dimensions and fastening torque
Fig. : Minimum cable bend radius
Fig. : Panel dimensions: REC Alpha Series
Fig. : Panel dimensions: REC Alpha Black Series
Fig. : RSD device installation zones