Installation Guide

l MappingexistingsitesusingtheMappermobileapplication



Physical Layout Editor

1.

Ifyouarearegisteredinstaller,accessthemonitoringplatformsitecreationpageat

https://monitoring.solaredge.com/solaredge-web/p/home#createSites.Ifyou

havenotyetsignedup,gotohttps://monitoring.solaredge.com/solaredge-

web/p/createSelfNewInstaller.

2. Filloutallrequiredinformationinthescreen,whichincludesinformationabout

yourinstallation,aswellasdetailsaboutitslogicalandphysicalmapping.



Using a Paper Template

FilloutthePhysicalLayoutTemplate(downloadablefromtheSolarEdgewebsite

http://www.solaredge.com/files/pdfs/physical-layout-template.pdf)usingthe

detachable2Dbarcodestickersoneachpoweroptimizer.Oncetheformiscompleted,

usetheMappertoscanthe2Dcodesandcreatethemapinthemonitoringplatform.

Optionally,youcansendthestickersheettoSolarEdgeSupportforphysicallayout

creation.

Chapter 5: Activating, Commissioning and Configuring the System Using the Inverter

-Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.0