Installation Guide

Opening Conduit Drill Guides
Thisstepmaybeperformedbeforeoraftermountingtheinverter.
To open conduit drill guides:
1. MovetheSafetySwitchON/OFFswitchandtheinverterON/OFF/PswitchtoOFF.
NOTE
When the Safety Switch is OFF (for example during maintenance) it may be locked to prevent safety
hazard:
1. Move the safety switch to the Lock position.
2. Insert the lock through the knob opening and lock.
2.
LoosenthescrewsonthefrontcoveroftheSafetySwitch,asshownbelow:

Figure 13: Opening the Safety Switch cover
3. RemovetheSafetySwitchcover.
Chapter 3: Installing the Inverter
-Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.0
25