Warranty

IRONRIDGE LIMITED PRODUCT WARRANTY
1. For products sold after March 1, 2018, IronRidge provides, to the original purchaser of the
Products from IronRidge, and any subsequent owner of the Products, subject to section 4
below ("Purchaser"), the following warranties for "Products" (defined as products
manufactured by IronRidge, excluding polymeric components) and installed properly and used
for the purpose for which the Products are designed (collectively the "Warranty"), commencing
on the earlier of (a) the date of complete installation of the Products or (b) 30 days after the
initial purchase of the Products from IronRidge:
(c) for a period of five years, Products with finishes (excluding Products that are mill finished)
will be free of visible defects, peeling, or cracking; and
(d) for a period of 25 years, Products will be free of defects in materials and manufacturing
which materially impair the use of the Product for the purpose for which it was designed.
2. The Warranty excludes:
(a) any defect that has not been reported to IronRidge in writing (i) within the warranty periods
set forth above and (ii) within 60 days after discovery of such defect;
(b) normal wear, or damage resulting from misuse, overloading, abuse, improper installation
(including failure to follow professional instruction and certification), negligence, or accident, or
from force majeure acts including any natural disasters, extreme weather, war, or criminal acts;
(c) Products that have been altered, modified or repaired without written authorization from
IronRidge or its authorized representative;
(d) damage to or caused by, or defects in, parts or materials not sold by IronRidge (irrespective
of IronRidge documentation);
(e) Products installed, used or maintained in a manner contrary to IronRidge documentation;
and
(f) damage to the Products during shipment, storage, installation or use.
The finish warranty in section 1(c) above does not apply to surface oxidation or any foreign
residue deposited on the Product finish, or to Products installed in corrosive atmospheric
conditions, and is void if the practices specified by AAMA 609 & 610-02 – “Cleaning and
Maintenance for Architecturally Finished Aluminum”, or ASTM A780/A780M - 09 “Standard
Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings”, as
applicable, are not followed.