Manual

ManualsBrandsWholesale Solar ManualsGrid Tie12 kW Storage Ready Grid Tied Solar System with Outback Power and 40x Heliene 300w Panels

Buttons

Page 5 Page 4

900-0210-01-00 Rev A

SkyBox Select Button (H)

This selection represents the currently viewed SkyBox unit. See page 6.

NOTE: This button does not function if only one SkyBox is installed.

SkyBox Button (I)

Tapping this button opens the SkyBox Status screen. See page 6.

Settings Button (J)

Tapping this button opens the Global Settings series of screens. Global settings affect the system as a

whole as well as the GUI, network communications, and other large-scale settings. See page 6.

NOTE: Most of these settings cannot be changed without Installer login access.

Tiles

The central items, the Tiles, show real-time data for different aspects of the system. Tapping a tile allows

access to status messages, historical data, and settings. The tiles have several common features.

o Banner. This appears at the top of each tile and includes a status message. The banner color also indicates

general status. See below.

o Chevron. This appears above each tile. It is only present when the item in the tile is active. It may point

either up

ward or downward. The chevron will point downward when power flows to that item

(solar, battery,

etc.). It will point upward when the item contributes power.

Tile color codes:

 Item is in use and functioning normally

 Item is functioning normally in an alternate mode or state from that indicated by green

 Item is turned off and awaiting manual activation

 Item is not available or not present

 Item is faulted and cannot be activated until the fault is corrected

These color codes apply to both the banners, the chevrons, and the meter bars shown on many tiles.

Green

Yellow

Black

Gray

Red

S o l a r Tile (K)

This tile and its screens summarize data (historical and real-time) regarding PV harvest. Information on lifetime

production is available here. See page 9.

Grid Tile (L)

This tile and its screens summarize data (historical and real-time) regarding power bought from, or sold to, the

utility grid. Information on grid performance is located here. See page 10.

Tiles

Load Tile (M)

This tile and its screens summarize data (historical and real-time) regarding power being used to sustain

loads. Information is located here on load performance for both the L1 and L2 lines. See page 11.

Battery Tile (N)

This tile and its screens summarize data (historical and real-time) regarding battery status and state of

charge. Information can be tracked for multiple independent battery banks. See page 12.

Generator Tile (O)

This tile and its screens summarize data (historical and real-time) regarding generator operation. The

advanced generator start function (AGS) is managed here. See page 13.

A B

M N O