User Guide

60
• Search Dg AGC – Applies Digital AGC to found
digital transmissions.
• G AGC Mode – Enables Global AGC.
• G AGC On – Activates Global AGC.
• Scan Sets Opt - Turns on Scan Set Feature.
• Sounds – Sets EZ Scan beeps and alert sounds.
• Alerts –Controls audio alerts.
• Key Beeps – Enables or disables key tones.
• Beep Volume – Sets key tone volume.
• Alert Volume –Object volume.
• Contrast – Sets the LCD contrast.
• LModeBAT – Backlight mode during battery
operation.
• LModeEXT – Backlight mode (external power).
• Lite Area – Sets LCD and keypad lighting.
• Lite Time – Backlight duration.
• Lite Level –Controls backlight brightness.
• Welcome Text 1-5 – Sets the text displayed on five
lines of the display when the scanner is first turned
on.
 Expert 
• Skip - Programmed to “lockout” will permanently
locks out an object when the SKIP button is pressed.
• Blink Time 1-2 – Controls the amount of time each
item is displayed.
• Show Radio ID – Displays the Radio ID for trunked
systems, if available. Tag Only.
• Use RID Alert –Controls alert for Radio ID
transmissions.
• Show VC/CC – Displays voice and control channel.
Simple Display must be unchecked. Show Radio ID
will override if available.
• Show TGID – Displays talkgroup ID. Simple Display
must be unchecked.
• Show Site Name – Displays trunking site
name, only if two or more trunking system
sites are programmed. Simple Display must be
unchecked.
• CONV TGID – Displays the talkgroup ID for P25/
DMR conventional talkgroup calls. Simple Display
must be unchecked.