User Guide

Internal Clock/Calendar

Your scanner includes a real time clock/calendar that is

used to correctly date and time stamp recorded audio

files. The first time you power on your scanner, you will

be prompted to set the time and date.

If batteries are allowed to fully discharge, or if they are

removed from the scanner for more than a few minutes,

the date and time will need to be set again. You can

also set the date and time over the USB connection

using the EZ Scan Software, or directly on the radio

using the Set Clock function in the Main Menu.

Monitoring and Scanning

When programmed, your scanner provides two basic

functions for scanning radio transmissions:

• Monitoring – Listening to a single object.

• Scanning – Checking multiple saved objects,

stopping when a transmission is detected.

To scan more quickly, you can skip or lock out

frequencies that you do not wish to scan. A skipped

frequency is ignored during the current scan; a locked

out frequency is ignored for all scans unless it is

unlocked.

To monitor a frequency or talkgroup:

1. From the main menu, select Browse Objects, then

press .

2. Use the direction keys to browse Scanlists and

objects.

3. Press /II/SEL to monitor the displayed frequency.

4. Press  or  to select another object or press

/II/SEL to begin scanning.

To scan your active Scanlists:

1. Press MENU.

2. Select Scan from the main menu and press  or

/II/SEL.

3. To pause the scan, press /II/SEL when scanner

stops on a transmission. To resume scanning, press

/II/SEL again.