User Guide

41
Alert LED Settings
NOTE: The EZ Scan PC application allows you to group
objects (such as all Keller Fire Department) and edit
the color to red. Even add an alert tone to differentiate
Keller Fire from Hurst Fire. The following instructions
show you how to edit color of an individual object from
the keypad.
The Alert LED has been enhanced. These
enhancements provide powerful new capabilities
for customizing the Alert LED, giving you even more
flexibility to show unique colors and flash patterns when
transmissions are received on important talkgroups and
channels. The following program charts are examples
of how the Alert LED can be configured to produce
unique and noticeable effects and colors.
1. Press MENU.
2. Select Browse Objects.
3. Use the  or  to select a Scanlist.
4. Use the or  to select an object within the
selected Scanlist.
5. Press MENU to enter object options. (options
are shown in the following examples) Scroll till
“Flash Pattern” is shown and press the .
6. A list of 8 characters are displayed (55555555).
Adjust each one to obtain the flash pattern desired.
Options are 0-9 and A-F. See Flash pattern chart for
how each number/letter will control the Alert LED.
7. Once set press SEL to accept the flash rate. Press 
to import the items. (This may take several minutes.)
EXAMPLE: Using the above chart with pattern
3B3B3B3B, the LED pattern for "3" is "off/off/on/on"
and the LED pattern for "B" is "on/ off/on/on." With
this selection the Alert LED will flash back and forth
between "off/off/on/on" and "on/off/on/on." The flash
pattern goes in order from left to right.
NOTE: Both the flash rate and color options are in
hexadecimal format.