Installation guide

Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm) countertop
height.
Freestanding Range Slide-in Range
B
\
\
9
B F
A. 4" (10.2 cm) min. clearance
from both sides of range to
side wall or other combustible
material
B. 18" (45.7 cm) upper cabinet to
countertop
C. !3" (33 cm) max. upper cabinet
depth
D.30" (76.2 cm) min. opening
width
E. For minimum clearance to A. 4" (10.2 cm) min. clearance F. 223/4``(57.8 cm) opening depth
the top of the cooktop, from both sides of range to G. 30" (76.2 cm) min. opening
see NOTE _. side wall or other width
F. 30" (76.2 cm) min. opening combustible material H. V4" (6.2 cm) radius both comers
width B. 18" (45.7 cm) upper cabinet I.Junction box - 8" (20.3 cm) to
G. Junction box - 8" (20.3 cm) to countertop 22" (55.9 cm) from either
to 22" (55.9 cm) from either C. 13" (33 cm) max. upper cabinet, 7" (17.8 cm) max. from
cabinet, 7" (17.8 cm) max. cabinet depth door
from door D. 30" (76.2 cm) min. opening J. 7/8"(2.2 cm) min. required
H. 7/8"(2.2 cm) min. required width between cutout and cabinet
between cutout and cabinet E. For minimum clearance to door or hinge
door or hinge the top of the cooktop,
see NOTE*
*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood above the range, follow the instructions for dimensional clearances above the cooktop surface.