Use and care guide

8
This appliance is marked in
compliance with European
Directive 2012/19/EU, Waste
Electrical and Electronic
Equipment (WEEE).
By ensuring this product is
disposed of correctly, you will
help prevent potential negative
consequences for the
environment and human
health, which could otherwise
be caused by inappropriate
waste handling of this product.
The symbol (*) on the
product or on the
accompanying
documentation indicates
that it should not be treated as
domestic waste but must be
taken to an appropriate
collection centre for the
recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
Always dry a full load,
depending on the type of
laundry and the programme/
drying time. For more detailed
information, see the
programme chart.
By preference use the
maximum spin speed allowed
by your appliance, since
draining the water mechanically
requires less energy. You will
save time and energy when
running your drying cycle.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with
the recycle symbol (*). The
various parts of the packaging
must therefore be disposed of
responsibly, and in strict
compliance with the regulations
established by the local
authorities.
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance,
make it unusable by cutting o
the power cable and removing
the doors and shelves (if
present) so that children cannot
easily climb inside and become
trapped.
This appliance is manufactured
with recyclable (*) or reusable
materials. Dispose of it in
accordance with local waste
disposal regulations.
For further information on the
treatment, recovery and
recycling of household
electrical appliances, contact
your competent local authority,
the collection service for
household waste or the store
where you purchase the
appliance.
SAFEGUARDING
THE ENVIRONMENT
Always select the correct
programme/drying time for the
load in order to obtain the
desired drying results.
Select the ‘Gentle’ option only
in case of drying small loads.
When drying cotton garments,
for example, load the garments
to be ironed and those not to
be ironed together. Begin by
setting the programme or the
drying time for the garments
to be ironed; at the end of the
cycle, remove the laundry to
be ironed, then dry the
remainder of the load by
setting the programme for the
garments that do not need to
be ironed.