Quick Start Manual

10
COMPLETE INSTALLATION
CHECKLIST
■ Check electrical requirements. Be sure you have correct
electrical supply and recommended grounding method.
See “Electrical Requirements.”
■ Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
■ Check that you have all of your tools.
■ Keep the foam packing ring from the washer tub for future
relocation of the washer. Dispose of/recycle all packaging
materials.
■ Check that both water faucets are on.
■ Check for leaks around faucets and inlet hoses.
■ Remove lm from console and any tape remaining
on washer.
■ Check that washer is plugged into a grounded
3-prong outlet.
■ Read “Washer Use” in your “Use and Care Guide.”
■ To test and clean your washer, measure 1/2 of normal
recommended amount of High Efciency (HE) powdered
or liquid detergent for a medium-size load and pour it into
detergent dispenser. Close lid. Press POWER. Select
a normal cycle and press START. Allow it to complete
one whole cycle.
5. Plug into a grounded
3-prong outlet