Instruction for Use

25
TRANSIT BOLTS
The appliance is fitted with transit bolts to
prevent internal damage while it is being moved.
Before using the appliance the transit bolts
MUST be removed (fig. 1).
1.
Slacken the bolts with the spanner supplied
(Fig. 2).
2.
Remove by hand.
3.
Hold each bolt head and pull the bolts
complete with plastic spacer through the
wide part of the holes.
4.
Seal the resulting holes using the plastic
caps supplied. Insert the caps into the large
aperture in the direction of the arrow and
push in the narrow groove until it clicks
(Fig 3).
5.
Retain transit bolts.
Note:
The transit bolts must be fitted prior to the
appliance being moved:
•
Pry up the plastic caps with a screwdriver,
slide them out against the direction indicated
with the arrow and remove them.
•
Refit the transit bolts in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3