Installation Guide

4
Door Removal, Leveling and Alignment
Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
IMPORTANT: The graphics on this page are for models with the ice storage bin on the door. On models with the ice storage bin inside
the freezer, the wiring and water dispenser tubing configurations are simpler than what is shown in these graphics. Please read all
instructions on the next few pages for more information.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove
food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
2A
Water Dispenser
Tubing Connection
(Style 1)
A. Face of Fitting
A
1
Base Grille
3
Wiring Connection
Bottom Hinges
(Left and Right)
7
B. Routing
Plate
A
C. Electrical
Housing
A. P-clamp D. Wiring Clip
F. Wiring
Plugs
E. Grommets
5
Door Removal
DCBA
4
Top Left Hinge
A. Do Not Remove Screws.
A
A
A
6
A. Do Not Remove Screws.
Top Right Hinge
Leveling
8
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
(Bottom Right Hinge)
9
A. Alignment Screw
A
A
Lower
Raise
A
A
Raise Lower
A
B
C
FE
Doors must be
open to 90˚
2B
Water Dispenser Tubing
Connection (Style 2)