Installation Instructions

12. Insert screws in hinge holes

on dryer cabinet

NOTE: Two people may be needed to reinstall door.

Insert screws into the bottom holes on left side of dryer

cabinet. Tighten screws halfway. Position door so large

end of door hinge slot is over screws. Slide door up so

screws are in bottom of slots. Tighten screws. Insert

and tighten top screws in hinges.

Use a small,  at-blade screwdriver to gently remove 4 hinge

hole plugs on left side of dryer cabinet. Transfer plugs into

hinge holes on opposite side of dryer cabinet.

11. Remove and transfer

hinge hole plugs

Remove door strike and door strike plug from dryer cabinet.

Insert the door strike into door strike plug hole and secure

with screw. Insert door strike plug into original door strike

hole and secure with screw.

10. Remove door strike and

door strike plug

Door strike plugDoor strike

Close door and check that door strike aligns with door

catch. If it is needed, slide door catch left or right within

slot to adjust alignment.

13. Check door strike alignment

TROUBLESHOOTING

See the Use and Care Guide or visit our website and

reference Frequently Asked Questions to possibly avoid

the cost of a service call.