Instructions / Assembly

Install Oven

1. Using 2 or more people, lift the oven partially into the cabinet

cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of the oven front frame when

pushing the oven into the cabinet. Do not push against the

outside edges.

2. Push against the seal area of the front frame to push the oven

into the cabinet until the back surface of the front frame

touches the front wall of the cabinet.

3. Push oven completely into the cabinet and center the oven

into the cabinet cutout.

NOTE: If you have model KEBK171B, KEBK101B,

KEBK276B, KEBK206B, KEBS179B, KEBS109B, KEBS277B,

KEBS279B, KEBS207B, KEBS209B, KEBU109B or

KEBU209B, proceed to Step 5.

4. Insert the grommet into the mounting rail hole using a flat-

blade screwdriver. Insert the screwdriver into the grommet

and turn ¹⁄₄ turn counterclockwise. Make sure the grommet

stays in position.

5. Securely fasten oven to cabinet using the # 8–14 x 1" screws

provided. Insert the screws through hole in the grommet. Do

not overtighten screws.

6. On models with the foot positioned with the long side of the

foot facing toward the top of the oven, the oven vent is taped

to the side of the oven. See the following instructions to

install.

■ Align vent tab (B) with oven frame (A) as shown.

■ Using one #8-18 x ³⁄₈" screw (D) on each side of the vent

tab (B), fasten the vent securely to the oven.

A. Shipping foot

A. Mounting rail

B. Mounting rail hole

C. Grommet

A. Oven frame

B. Vent tab

C. Oven vent

D. #8–18 x

³⁄₈" screws