Instructions / Assembly

14-1/2"
4" 3-1/2"
1"
3
Before You Start
Specifications & Dimensions
q Read all steps and guides carefully before installing and using your kitchen & bath water filtration
system. Follow all steps exactly to correctly install. Reading this manual will also help you to get all the
benefits from the filtration system.
q
Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. This system is certified for cyst reduction and may be used on
disinfected waters that may contain filterable cysts.
q All plumbing should be done in accordance with local codes and requirements. In Massachusetts,
plumbing code 248 CMR 3.00 and 10.00 shall be adhered to. Consult with your licensed plumber.
q State of California Proposition 65 Warning: This product contains one or more chemicals known to the
State of California to cause cancer, birth defects, or other reproductive harm.
q The kitchen & bath water filtration system works on water pressures of 30 psi (minimum) to 100 psi
(maximum). If your house water pressure is over the maximum, install a pressure reducing valve in the
water supply pipe to the filtration system.
q Do not install the filtration system outside, or in extreme hot or cold temperatures. Temperature of
the water supply to the filtration system must be between 40°F and 100°F. Do not install on hot water.
Supply Water Pressure Min. - Max. 30 - 100 psi (207 - 689 kPa)
Supply Water Temperature Min. - Max. 40 - 100 °F (4 - 38 °C)
Rated Service Flow 1.85 gallons per minute (7.0 liters per minute)
Inlet - Outlet 3/8" quick connect fittings and tubing included
4”
FIG. 1
14-1/2”
3-1/2”
1”
Questions? Call Toll Free 1-866-986-3223 or visit whirlpoolwatersolutions.com
When you call, please be prepared to provide the model number and date code, found inside the top cover.