Quick Start Manual

5. Reverse outer window assembly

Using a Phillips screwdriver, remove the 4 screws from the

outer window retainer and lift off the trim ring off the window

(A). Rotate trim ring 180° and secure with the 4 screws

removed earlier (B).

Handle

Fig. A

Fig. B

Handle

6. Rotate and reassemble outer window

assembly to trim ring

With the edge with 2 notches at the top, align the notches

on the outer window assembly with the tabs on the trim ring

and lower into place as shown in gure A. Rotate the outer

window assembly counterclockwise to lock tabs into place

(gure B). Using a Phillips screwdriver, secure with 2 screws

removed earlier.

IMPORTANT: Do not overtighten.

Fig. A

Fig. B

Bottom

of door

Notches