Installation Guide

5. Reinstall hinge and latch on

opposite sides

Using a T25

screwdriver, reinstall the latch plate and latch

backing plate with the 3 TORX

screws removed earlier and

the hinge assembly with the 5 screws on the opposite sides

from which they were removed.

6. Reinstall inner door assembly

Position the door with the inside of the door facing up.

Reinstall the 10 screws securing the inner door to the

outer door.

7. Reinstall door on dryer

Using a T25

screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot

and slide down to engage the top tab. Secure in place with

the 4 screws removed earlier.

Bottom

of door