Installation Guide

10
4. Add HE detergent*
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, or fabric softener crystals to dispensers. They will
not dispense correctly.
Liquid
HE detergent
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer’s
directions for correct amount of fabric softener based on
your load size.
Fabric softener is always dispensed in the last rinse, even
if Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than
¼ cup (60 mL) of fabric softener. Do not fill past the MAX line.
Overfilling dispenser will cause fabric softener to immediately
dispense into washer.
Q

Do not spill or drip any fabric softener onto the clothes.
Q

Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
5. Add liquid fabric softener
to dispenser (if desired)
6. Touch and hold Power button to turn
on washer
7. Select program/cycle
†
Turn the knob to select a program/cycle for your laundry load.
As you turn the knob, an indicator light will light up next to
the program/cycle names to the left of the knob. Stop turning
when the indicator next to the desired program/cycle lights up.
Press the knob to confirm your selection.
See “Program/Cycle Guide” for details on program/cycle
features.
with
Clean Washer
Heavy Duty
Normal
Synthetics
Delicates
Wool
Quick Wash
Handwash
Rinse & Spin
Spin
with
†
Not all options and settings are available with all program/cycles.
See “Program/Cycle Guide” for available options and settings.
* Detergent can be added after touching the Start/Pause button
if the Dosing Aid is used (see Step 8).
Touch and hold until the indicators turn on.
NOTE: To cancel a cycle, touch and hold the Power button.
“rES” is displayed when the cycle is cancelled.
NOTE: When powering on the washer, the indicator lights
will scroll across the front of the control panel. Do not try to
program the washer until the lights stop scrolling.
Powdered
HE detergent