Installation Instructions
13
2. Remove the cap from the gas pressure regulator using a
at-blade screwdriver.
NOTE: Be sure sealing washer remains in the same position.
A. Cap
3. To convert to Propane gas, unscrew the plastic adjustment
screw by hand, turn it over, and screw it in again.
A. Cap
B. Sealing washer
C. Adjustment screw
4. Reinstall the cap.
To Convert Surface Burners
1. Remove burner grate, burner caps, and burners.
A. Burner cap
B. Burner
2. Locate the Propane gas orice spuds for top burners in
the bag containing literature included with the range. One
Propane gas spuds are stamped “073,” two are stamped
“117,” and one is stamped “088.”
3. Remove Natural gas orice spuds using a 7 mm (9/32")
combination wrench.
4. Install Propane gas orice spuds using a 7 mm (9/32")
combination wrench.
A. Spud
NOTE: The range cooktop is equipped with 4 burners: 2 burners
are power (front), 1 burners is standard (left rear), and 1 is
simmer (right rear).
A. Standard burner - Propane gas orice spud number 088
B. Power burner - Propane gas orice spud number 117
C. Simmer burner - Propane gas orice spud number 073
D. Power burner - Propane gas orice spud number 117
5. Place the Natural gas orice spuds in the parts bag for future
use and keep with the bag containing literature.
6. Reinstall burners, burner caps, and burner grates.
To Convert Oven Burner
1. Open the oven door and remove oven racks and oven tray
with ame spreader, and set aside.
2. Remove screw from the oven burner. Lift oven burner and
pull the burner toward you. The orice spud is behind the
oven burner air shutter.
A. Oven burner
B. Air shutter
C. Screw
A
Inlet pressure
to Natural gas
Inlet pressure
to Propane gas
A
B
A
B
A
C
A
B
C
D
A
C
B
180°