Installation Instructions

To Convert Oven Burner

1. Open the oven door and remove oven racks and oven tray

with ame spreader, and set aside.

2. Remove screw from the oven burner. Lift oven burner and

pull the burner toward you. The orice spud is behind the

oven burner air shutter.

A. Oven burner

B. Air shutter

C. Screw

3. Locate Natural gas orice spud stamped “49” in the bag

containing literature supplied with the range.

4. Use a 3/8" (1 cm) combination wrench to remove the

Propane gas orice spud.

5. Install the number “49” Natural gas spud.

A. Natural gas oven orice spud stamped with “49”

IMPORTANT: Do not overtighten.

6. Place Propane gas oven burner spud in plastic parts bag

along with Propane gas cooktop burner spuds for future use

and keep with the bag containing literature.

7. Reinstall oven burner.

8. Reinstall oven racks, oven tray, and ame spreader.

Complete Conversion

1. Refer to the “Make Gas Connection” section for properly

connecting the range to the gas supply.

2. Turn the manual shut-off valve in the gas supply line to the

open position.

3. Refer to the “Electronic Ignition System” section for proper

burner ingestion, operation, and burner ame adjustments.

IMPORTANT: You may have to adjust the “LOW” setting for

each cooktop burner.

Checking for proper cooktop and oven burner ames is very

important. The small inner cone should have a very distinct

blue ame 1/4" to 1/2" (0.64 cm to 1.3 cm) long. The outer

cone is not as distinct as the inner cone. Natural gas ames

do not have yellow tips.

4. Close the broiler door and turn the knob to OFF position.

5. Refer to the “Complete Installation” section to complete this

procedure.

W11508870A

04/21