Use and Care Manual

5
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Product Help section
of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Product Help Section at www.whirlpool.ca.
KEYPAD FEATURE INSTRUCTIONS
SETTINGS/
CLOCK
Clock The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Control” section.
1. Press SETTINGS/CLOCK until “CLOCK” is displayed.
2. Press START to change the time.
3. Press “3” for AM or “6” for PM.
4. Use the number keypad to set the time of day.
5. Press SETTINGS/CLOCK or START to save the setting.
SETTINGS/
CLOCK
Settings Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Electronic Oven Control” section.
OVEN LIGHT Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is closed,
press the oven light keypad to turn the light on and off. When the oven door is opened, the oven
light will automatically come on.
TIMER
(Set/Off)
Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min-min. Leading zeroes do not
have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/OFF to begin the countdown. If enabled, one tone will sound at end of
countdown.
4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day. Do not press
the Cancel keypad because the oven will turn off.
5. If the Timer is running, but not in the display, press TIMER SET/OFF to display the countdown
for 5 seconds.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after pressing a
keypad, the function is canceled and the time of day is displayed.
CANCEL Range function The Cancel keypad stops any function except the Clock and Timer.
BAKE Baking and
roasting
1. Press BAKE.
2. Press the number keypads to set the desired temperature.
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
FEATURE GUIDE