Installation Guide

8. Reinstall hinge and latch on

opposite sides

Using a T25

screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides

from which they were removed.

7. Remove hinge and latch

Using a T25

screwdriver, remove the 3 screws securing the

latch plate and latch backing plate and the 5 screws holding

the hinge assembly in place.

Hinge

Latch

9. Reinstall inner door assembly

Position the door with the inside of the door facing up. Using

a Phillips screwdriver, reinstall the 10 screws securing the

inner door to the outer door.

10. Reinstall door on dryer

Using a T25

screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot

and slide down to engage the top tab. Secure in place

with the 4 screws removed earlier.

Bottom

of door