Use and Care Manual

28
Use a 5/16" nut driver to reinstall the screws through the holes in
the access panels.
IF DISHWASHER DOES NOT OPERATE
First try the solutions suggested here to possibly avoid the cost
of a service call.
■ Has the circuit breaker tripped or the house fuse blown?
■ Is the door closed tightly and latched?
■ Has the cycle been set correctly to start the dishwasher?
■ Is the water turned on?
■ Is the oat switch wire under the product connected to the oat
switch?
■ Make sure control lock is not on.
If none of these possible solutions work, please see the Quick
Start Guide for service contact information.
52. Reinstall access panels