Installation guide

2 | Power Supply Cord—Prepare hole
SS :
cabinet
he
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet included with power
supply cord kit.
3 | Direct Wire—Route cable
Route cable from power supply through cabinet hole (cable must
extend to the right front side of cabinet opening). Tape cable to
the floor in area shown. This will prohibit cable from moving when
dishwasher is moved into cabinet opening.
Option B, Direct Wire:
Helpful Tip: Wiring the dishwasher will be easier if you route the
cable into the cabinet opening from the right-hand side.
1 |Direct Wire — Drill hole
Optional locatio SS
Preferréd location
MAY
Ss
Drill a %4" (1.9 cm) hole in right-hand cabinet side or rear.
See “Product and Cabinet Opening Dimensions” section.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797 -
not provided).
PY one, ye, gor goypn, epnazar, oe O° cm abepon, YIN pmgehe gem yp I Bry, pom,
Prepare and Roule Waiter Line
Helpful Tip: Routing the water line through the side of cabinet
opening will make water connection easier.
Drill hole
|
Preferred locations
Hot water line
Measure overall length of copper tubing or flexible braided water
supply line. Attach to the hot water line using a connection
configuration that is in compliance with local codes and
ordinances. The water line to the dishwasher should have a
manual shutoff valve.