Installation guide

Using two or more people, grasp sides of dishwasher door frame

and place dishwasher on its back.

Remove and discard the plastic rail cover on each side of the

dishwasher frame. To remove the plastic rail cover, push upward

and back to unsnap it from the dishwasher frame.

Using a flat-blade screwdriver, turn the plastic fasteners 1¼turn

counterclockwise to unlock them. Remove panel. Do not remove

tech sheet from access panel.

Using a 1/4"hex head socket, nut driver or Torx®T20 ®screwdriver,

remove terminal box cover. Retain for later use.

Install a UL Listed/CSA Approved strain relief. Make sure screw

heads are facing to the left when tightening conduit nut. Strain

relief is provided with the power supply cord kit.

NOTE: If using Option B, proceed to "Determine Cabinet

Opening," to continue with the installation of your dishwasher.