Service Manual

4-10
n
18” & 24” ADA Built-In Dishwashers
COMPONENT ACCESS
Removing the Control Board
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Remove the Control Board
The Control Board can be removed from its enclosure at the
boom of the dishwasher.
1. Unplug dishwasher or disconnect power.
2. Remove two (2) screws securing the kick board (toe panel)
to dishwasher frame (see Figure 1).
Figure 1
3. Remove one (1) cover screw from the control board
enclosure (see Figure 2). Remove cover and set aside.
Figure 2
4. Disconnect all harnesses from the control board.
5. Depress the two (2) clips indicated in Figure 3 and remove
control board from enclosure.
Figure 3