Installation Guide

16
34. Leveling Leg adjustment
Turn leg counter clockwise to raise the dishwasher or clockwise
to lower the dishwasher.
35. Open and close door
Open and close the door to check spring tension of door.
36. Adjust door spring tension
If needed adjust spring tension by using a Phillips-head screw
driver. Turn screws clockwise to increase tension or counter
clockwise to decrease door tension.
If spring is adjusted to its maximum tension and door still falls
rapidly after opened, it is recommended to install the springs
supplied with the product inside the accessories bag.
After springs are replaced, revisit the steps 35 & 36.
Screw to side
cabinet
37. Secure dishwasher
Open dishwasher door to prepare for securing the dishwasher
to the countertop or side cabinet.
NOTES:
■ The dishwasher must be secured to keep it from shifting when
the door is opened or closed.
■ Do not drop screws into bottom of dishwasher.
■ Locate brackets installed in the “Choose Anchor Attachment
Method” section, either on top or on the sides of the dishwasher.
■ If countertop anchoring: Secure dishwasher to the countertop
with two Phillips-head screws (included).
■ If side anchoring: Drill pilot holes in cabinet to avoid splitting
the wood. Secure dishwasher to cabinet with two Philips-head
screws (included). Remove upper rack for easier access. See
the User Guide for instructions on how to remove the upper
rack if needed.
Adjustment cap
Screw to side wall
38. Sidemount attachment method
Remove plastic caps covering screw holes on either side.
–
–
39. Drill pilot holes
If side anchoring: Drill pilot holes in cabinet to avoid splitting wood.
Adjustment cap
Screw to side wall
Door spring
adjustment screws