Installation guide

Using 2 or more people, grasp sides of dishwasher door frame

and place dishwasher on its back.

Removea di!asten

iiiii!iiiII ! iiiiiiiiiiI!iiiiiiiiiill_ @_

_!tun Q

Using a flat-blade screwdriver, turn the plastic fasteners 1/4turn

counterclockwise to unlock them. Remove panel. Do not remove

tech sheet from access panel.

® ®

Using a 1/4"hex head socket, nut driver or Torx' T20 screwdriver,

remove terminal box cover. Retain for later use.

Install a UL Listed/CSA Approved strain relief. Make sure screw

heads are facing to the left when tightening conduit nut. Strain

relief is provided with the power supply cord kit.

........... /

connection will you use?

Direct Wire:

: Follow Option B instructions

NOTE: If using Option B, proceed to "Determine Cabinet

Opening," to continue with the installation of your dishwasher.

Option A, Power Supply Cord:

Route cord so that it does not touch dishwasher motor to lower

part of dishwasher tub. Pull cord through strain relief in terminal

box.