Quick Start Guide
Table Of Contents
- Dishwasher Safety
- INSTALLATION REQUIREMENTS
- Installation Instructions
- Prepare Cabinet Opening - New Utilities
- Electrical Connection
- Prepare Dishwasher
- Remove Access Panel
- Connect Water Line to Fill Valve
- Connect Fill Hose to Fill Valve
- Drain Hose Connection
- Power Cord Connection
- Install Door Handle
- Choose Anchor Attachment Method
- Secure Dishwasher in Cabinet Opening
- Direct Wire Connection
- Connect Water Line to House Shut-Off Valve
- Connect Drain Hose
- Complete Installation
- Install Access Panel
- Check Operation
- If Dishwasher Does Not Operate
- Additional Tips
4
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools Needed:
Pliers Flat-blade screwdriver
Phillips screwdriver Utility knife
5
/
16
" and
1
/
4
" nut drivers or
hex sockets
Small level
Measuring tape or ruler
5
/
8
" open-end wrench
10" adjustable wrench that
opens to 1
1
/
8
" (29 mm)
Torx
®†
T20
®
screwdriver
Other Useful Items You May Need:
Flashlight Shallow pan
Bath towel Masking or duct tape
Parts Supplied:
Drain hose clamps (2)
(1 large/red and 1 small/green)
Drain hose
#10 x
1
/
2
" Phillips-head
screws (2)
Undercounter mounting
brackets (2)
Make sure all these parts are included in the literature package.
If parts are not included, call us at our toll-free number or visit
our website listed in the User Guide.
Door handle (on some models)
†
®
TORX and T20 are registred trademarks of Acument Intellectual Properties, LLC.