Setup and user guide

2
DETERGENT DISPENSER
See the section DAILY USE for instructions on selecting and
starting a programme.
The rst time the machine is switched on, you will be asked to
select the language and the display will automatically show the
language selection menu.
To select the desired language press the and
h.
buttons;
to conrm the selection press the button.
To change the language switch o the machine and press
buttons , , simultaneously until an alarm is heard:
the language-selection menu will be displayed again.
To change the display luminosity, which by default is set to
the medium value, switch the machine o then
simultaneously press buttons , and until the
buzzer sounds. Press buttons and
h.
to choose the
desired level of luminosity then conrm by pressing button
.
FIRST TIME USE
Prewash Compartment
• Detergent for prewash
Main Wash Compartment
• Detergent for the main wash
• Stain remover
• Water softener
Softener compartment
• Softener
• Liquid starch
Pour softener or starch solution into the
compartment without exceeding the “max” level.
Release button
(press to remove tray for cleaning).
Preferably use the partition A when
washing with a liquid detergent for
washing, to ensure that the correct
quantity of detergent is used (the
partition is included in the bag
containing the instructions).
Move the partition into slot B when
using detergent powder.
B
A
First cycle operation
Remove any manufacturing debris:
1. Select the programme with a temperature setting of 60 °C.
2. Pour a small quantity of detergent powder into the main
wash compartment of the detergent dispenser
(maximum 1/3 of the quantity the detergent
manufacturer recommends for lightly soiled laundry).
3. Start the programme without loading the washer dryer
machine (with empty drum).