Instruction for Use

GB 8
Using chlorine bleach
• Wash your laundry in the desired programme
(Cotton, Synthetics), adding an appropriate
amount of chlorine bleach to the SOFTENER
chamber (close the lid carefully).
• Immediately after end of programme, start the
“Rinse and Spin” programme to eliminate any
residual bleach smell; if you want, you can add
softener.
• Never put both chlorine bleach and softener into
the softener chamber at the same time.
Using starch powder
If you want to use starch powder, proceed as follows:
• Wash your laundry in the desired wash programme.
• Prepare the starch solution according to the
starch manufacturer’s instructions.
• Fill the prepared starch solution (maximum
100 ml) into the softener chamber of the
detergent dispenser.
• Close the lid and start programme “Rinse and Spin”.
Where to put detergents and additives
Pour in the detergent:
• Washing powder for prewash and main wash
• Washing powder for main wash without prewash
• Fabric softeners no more than to “MAX” mark.
• Stain removers
• Water softeners (water hardness class 4)
• Starch (dissolved in water; maximum 100 ml)
Be careful not to fill more than the “MAX” level mark.
For programmes without prewash and temperatures from cold to
40° C, it is recommended to use liquid detergents to avoid whitish
residues on the laundry.
()
IFU-TL HR GB.fm Page 8 Thursday, June 7, 2007 2:23 PM