Use & care guide

7. Select LOAD SIZE
LOAD SiZE
Ex Large O
Large e
Medium o
Smalh
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Ex Large
will add the most amount of water for large or bulky loads.
Items need to move freely.
8. Select WASH TEMP
WASH TEMP
Hot o
Warm o
Cool 0
Cold o
Tap Cold o
9. Select rinse options, if desired
RINSE OPTIONS
01 Rinse
o 2 Rinses
)2 Rinses
with
softener
Select 1 or 2 Rinses (with or without fabric softener) by
turning the knob to the desired setting.
1 0. Select SOIL LEVEL
SOIL LEVEL
o Regular
0 Heavy
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist in Colors that bleed
soil removal and to help dissolve or fade
detergents. Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
Tap Cold
This is the temperature from your Dark colors that
faucet, bleed or fade
Light soils
Once you select a cycle, select the desired soil level by turning
the Soil Level knob to the desired setting.
1 1. Press START/Pause
to begin wash cycle
Start / Pause
Held 3 Seconds
to CanceI
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments
if you need to open the lid to add 1 or 2 missed garments:
Press START/Pause; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
8