Use & care guide

9
Install Range Hood
1. Using two or more people, lift the range hood into the
prepared installation location.
2. Align the rectangular opening on the back of the range hood
with the hood mounting bracket. Slowly lower the range hood
until it securely engages the bracket.
3. Level the range hood with two 3.9 x 9.5 mm pan head
screws.
4. Mark location of 4 mounting holes on wall with pencil.
5. Remove range hood from mounting bracket.
6. If installing screws into wood, drill four ⁵⁄₃₂" (4 mm) pilot holes.
OR
If using drywall anchors, drill four ⁵⁄₁₆" (7.9 mm) pilot holes.
7. If mounting the range hood to drywall, insert drywall anchors.
8. Lift range hood back into the prepared installation location.
9. Secure the range hood with four 4.8 x 38 mm pan head
mounting screws.
10. Mount the wiring assembly to the range hood with
two 3.9 x 9.5 mm pan head screws.
Vented Installation - Style 1
1. Attach an adequate length of 6" (15.2 cm) round metal duct
to the range hood duct connector.
2. Seal connection with vent clamp.
A. 3.9 x 9.5 mm pan head screws
B. Wall
C. Hood mounting bracket
A. Range hood
B. Wall
C. 4.8 x 38 mm pan head mounting screws
WARNING
Excessive Weight Hazard
Use two or more people to move and install
range hood.
Failure to do so can result in back or other injury.
A
B
C
C
A
B
A. 3.9 x 9.5 mm pan head screws
B. Wiring assembly
A. 6" (15.2 cm) round metal duct
B. Duct connector
A. 6" (15.2 cm) round metal duct
B. Vent clamp
A
B
B
A
B
A