Quick Start Guide

FIRST USE

Connect the appliance to the water system and power supply (refer to the Installation manual).

When connecting the appliance to the power supply, the display will show the temperatures preset by the

manufacturer.

If the temperature indicator appears, accompanied by the acoustic alarm (which means that the long

black-out alarm has been activated), press the alarm reset button.

Note: After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a temperature

suitable for a standard appliance load is reached.

GUIDE TO SELECTING FUNCTIONS

Freezer temperature

The factory-set ideal temperature is -18°C. To change the temperature, press the freezer temp. button

until the display shows the required value.

Refrigerator temperature

The factory-set ideal temperature is +5°C.

To change the temperature, press the fridge temp. button until the display shows the required value.

Ice & water mode

The ice & water mode button is used to select the type of ice: crushed or cubes . Water

delivery is always available and the corresponding icon is always on.

Fast freezing

This function must be activated before freezing fresh food. To activate the function, press the fast

freezing button until the symbol lights up. The function is automatically deactivated after 24 hours, or

manually by pressing again the button.

Vacation mode

This function deactivates the refrigerator compartment if the user is going away for sometime. This

function can be activated or deactivated by pressing the vacation mode button, which toggles the

symbol on and off. After activating the function, remove perishable food from the refrigerator

compartment and keep the door closed, since the refrigerator maintains an adequate temperature for

preventing the formation of odours.

USING THE APPLIANCE