Instruction for Use

88
en
hotpoint.co.uk
removing the bread.
Toast any items only until they are gold-
en brown and not brown or too dark.
Remove any burnt edges. Do not over-toast
food containing starch - especially grain and
potato products - to reduce the production of
acryl amides.
If a slice gets stuck at the end of the toast-
ing process, pull the power plug and carefully
remove the bread after the toaster has cooled
down.
The use of browning levels from 4 to 6 is
recommended for the preparation of
sandwiches.
Depending on the quantity or quality of
stufng, it can happen that the inside of
the sandwich is not warm enough or comple-
tely melt: in case, please leave the sandwich
into the slot for about one minute after ending
the toasting.
CLEANING AND MAINTENANCE
1. Disconnect from the AC outlet before clean-
ing.
2. Wipe the outside with a soft dry cloth after
the toaster has cooled down. Never use
metal polish.
3. Pull out the crumb tray from the bottom of
the toaster and empty it. If the toaster is
used frequently, accumulated bread crumbs
should be removed at least once a week.
Make sure the crumb tray is completely
closed before using the toaster again.
4. When the toaster is not used or is stored, the
power cord may be wound under the bottom
of the toaster.
5. Never use steam cleaners or pressure
cleaners on the appliance.
6. If you use specic products for cleaning
steel, be careful with the chrome parts. They
could get stained .
GUARANTEE
12 months Parts and Labour Guarantee
This certicate of guarantee represents the gua-
rantee (“Guarantee” hereinafter) offered by In-
desit Company UK Limited with registered ofce
at Peterborough PE2 9JB in relation to products
purchased in the United Kingdom and Indesit
Ireland Limited with registered ofce in Dublin 9,
Ireland for products purchased in the Republic of
Ireland. This Guarantee does not affect your sta-
tutory rights.
Your product has the benet of our manufactu-
rer’s Guarantee, which covers the product for
twelve months from the date of purchase.
This gives you the reassurance that if, within that
time, your product is proven to be defective be-
cause of either workmanship or materials, we will,
at our discretion, either repair or replace the pro-
duct at no cost to you.
This Guarantee is subject to the following condi-
tions:
Documentary proof of original purchase date
is provided.
Cosmetic damage must be reported within
14 days from the date of purchase.
The product has been installed and operated
correctly and in accordance with our opera-
ting and maintenance instructions.
The product is used only on the electricity
supply printed on the rating plate.
The product has been used for normal do-
mestic purposes only.
The product has not been altered, serviced,
maintained, dismantled, or otherwise interfe-
red with by any person not authorised by us.
Any repair work must be undertaken by us or
our appointed agent.
Any parts removed during repair work or any
product that is replaced become our proper-
ty.
The product is used in the United Kingdom
or Republic of Ireland.
The Guarantee does not cover:
Damage resulting from transportation, im-
proper use, neglect or interference or as a
result of improper installation.