Instruction for Use

N C

M Y

USING THE ELECTRONIC PROGRAMMER

NORMAL COOKING WITHOUT THE

USE OF THE PROGRAMMER

To use the oven manually, that is, without the aid of

the programmer, it is necessary to cancel the flashing

AUTO by pushing the button

(AUTO will be

switched off and the symbol

will light up –

Fig. 10.3).

Attention: If the AUTO is lighted up steadily (which

means a cooking programme has already been

entered), push the button

to cancel the programme

and switch to manual.

If the oven is switched on, switch it off manually.

ELECTRONIC TIMER

(fig. 10.4)

The timer programme consists only of a buzzer which

may be set for a maximum period of 23 hours and 59

minutes.

If the AUTO is flashing push the

button.

To set the time, push the

button and the

–

until you obtain the desired time in the panel (fig. 10.4).

Having finished the setting, the clock hour will appear

on the panel and the

lights up.

The symbol will light up. The countdown will start

immediately and may be seen at any moment on the

panel by simply pressing the button

At the end of the time, the

symbol will switch off

and an intermittent buzzer will sound; this can be

stopped by pressing any of the buttons.

(0.3)

(0.4)

SETTING THE FREQUENCY OF THE

AUDIBLE SIGNAL

Choose from 3 different sounds by pressing the

–

button.