Use and care guide

CLICK TO CLEAN - CLEANING THE GLASS

3. To correctly reposition the inner glass, make

sure that the “R” is visible in the right-hand corner

and the clear surface (not printed) is facing up.

First insert the long side of the glass indicated

by “R” into the support seats, then lower it into

position.

4. Refit the upper edge: A click will indicate

correct positioning. Make sure the seal is secure

before refitting the door.

1. After removing the door and resting it on a soft

surface with the handle downwards, simultaneously

press the two retaining clips and remove the upper

edge of the door by pulling it towards you.

2. Lift and firmly hold the inner glass with both

hands, remove it and place it on a soft surface

before cleaning it.