Gas Cooktop Model Number: RC8850XRH, RC8350XRH

Changing cooktop modules
The Cooktop Modules will work on either side or the center of the cooktops. NOTE: The
grill and grlddle module will fit only In the left side or center of the RCSS50XRH cooktop.
1. To remove, lift slightly
by the handle.
1. To replace, use both
hands to line up the ter-
minal with the receptacle.
2. With both hands, pull
module toward you to
unplug it.
3. Lift out and set aside.
2. Push terminal into place
3. Lower the front with the
until it’s plugged in.
handle.
. .1 -,-. / ..,. _I
Grill module (II~~;;~~C~~~X;;;; ;rill module will only fit on the left side
.
1. To remove, lift
off the grill.
2. Lift front of
heating element
and pull toward
you.
3. Lifl out basket
of ceramic
rocks.
1. To replace,
2. Put inbasket
3. Plug heating
lower the
with ceramic
element
grease well
rocks. terminal into
into opening
receptacle.
All grill parts must be cleaned atter each use to avoid excessive smoke, flare-ups,
fat spoilage and odors. See page 17.
.4q
4. Place grills
over the heat-
ing element.
4. Lifi and re-
move the grease
well, being
careful not to
spill fat drip-
pings.