Use and care guide

39
EN
WARNING
Switch o and unplug the washing machine before
cleaning the water lter or draining residual water.
If you used a hot wash programme, wait until the
water has cooled down before draining any water.
Clean the water lter regularly, to avoid that
the water cannot drain after the wash due to
obstruction of the lter.
If the water cannot drain, the display indicates that
the water lter may be clogged.
Place a broad, at container beneath the water
lter, to collect the drain water.
3. Drain the water:
If your washing machine model has an emergency
drain hose:
Remove the stopper at the end of the hose and
let the water ow into the container. When the
container is full with water, plug the stopper to
the hose end and empty the container. Repeat
this procedure until no more water ows out.
Afterwards rmly close the emergency drain hose
with the stopper and reinsert the hose in the
washing machine’s base.
CLEANING THE WATER FILTER / DRAINING
RESIDUAL WATER
1. Remove the plinth: Push the tabs left and right
to release the plinth and remove it.
2. Container for drain water:
If your washing machine model has an emergency
drain hose:
Provide a at container for the drain water. Remove
the emergency drain hose from the base of the
washing machine.
If your washing machine model has no emergency
drain hose: