Instruction for Use

 



 

 

2. Remove the knob and adjust the adjustment

screw, which is positioned in or next to the tap



 





 





5. Once the adjustment has been made, replace the seals on the by-passes

using sealing wax or a similar substance.

!

fastened as tightly as possible.

!           

indicating the new type of gas used. Stickers are available from any of our

Service Centres.

! Should the gas pressure used be different (or vary slightly) from the



inlet pipe (in order to comply with current national regulations).

Electrical

connections

DATA PLATE

This appliance conforms to the following

European Economic Community directives:

- 2006/95/EC dated 12/12/06 (Low Voltage)

and subsequent amendments

- 2004/108/EC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and subsequent

amendments.

- 2012/19/EU and subsequent amendments.

EU Regulation no. 66/2014 implementing

Directive 2009/125/EC.

standard EN 60350-2

standard EN 30-2-1

ECODESIGN

see data plate