Service manual

Electrical Shock Hazard
Disconnect power before servicing.
i
i
, Faiiure to do so can result in death or electrical shock.
DRAIN PUMP
Refer to page 4-1 0 for the procedure for ac-
cessing the drain pump.
Unplug washer or disconnect power.
2.
Disconnect the wire connector from the
drain pump terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to each
of the drain pump terminals. The meter
should indicate between
10.5 and 14 G,,.
RECIRCULATION PUMP
Terminals
Refer to page 4-10 for the procedure for ac-
cessing the recirculation pump.
1.
Unplug washer or disconnect power.
2. Disconnect the wire connector from the
recirculation pump terminals.
3.
Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to each of
the recirculation pump terminals. f he me-
ter
should indicate between 30 and 38 0.