Service manual

7. To remove the recirculation pump:
c) Disconnect the 2-wire connector from
a) Loosen the clamps and pull the recir-
the recirculation pump terminals.
-..~.
' cuiation hoses off the pump. Note that
there
is a tab on the outlet connector
that fits into a slot in the hose.
b) Remove the three 5116" hex-head
screws from the recirculation
pump
and remove the pump from the tub.
Stide Pumo Hose
[ :J
: Hose
* \(
crews
Wire Connectt